Firmware Update For X-Pro1 (3.50)

The latest firmware update for the X-Pro1, somewhat confirms that Fuji is done with updating the X-Pro1 beyond making it compatible with new lenses.

As we all know, technically, the X-Pro1 is a dinosaur when you compare it to today’s Fuji cameras, namely the new X-Pro2.  However, aside from it being light years behind the X-Pro2, the X-Pro1 is still an amazing camera.

Unfortunately, in regards to any future technical advances, it’s the end of the road for the X-Pro1.  I’m afraid that the last firmware update, was most likely the last time Fuji will update the X-Pro1 – aside from any updates to make it compatible with new lenses of course.

So, what does firmware 3.50 give you?  In short, not much.

  • 1.Addition of compatibility with “XF35mmF2 R WR”
    AF function will work more naturally and smoothly with “XF35mmF2 R WR”.
  • 2.Addition of compatibility with Teleconverter “XF1.4X TC WR”
    Function with the combination of “XF1.4X TC WR” and “XF50-140mmF2.8 R LM OIS WR” will be fully performed and values of aperture and focal length will be displayed correctly.

Unless you have either the new 35mm or 50-140mm with a TC, this firmware update will give you no further functionality in your X-Pro1.

If you would like to download this firmware update, please click here: (https://www.dropbox.com/s/259qkqs5kbnfo9b/FPUPDATE%20(12).DAT?dl=0&preview=FPUPDATE+(12).DAT)

Once again, please make sure that you have a camera formatted SD card and a fully charged battery when you install this update to your X-Pro1.

Who dares wins.

© d7100shooter.wordpress.com, All Rights Reserved

 

Advertisements

Please share your thoughts

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s